A jumbo loan is a mortgage above the conforming limit set by the Federal Housing Finance Agency (FHFA). For 2026, the limit in the Richmond area is $832,750, per our team notes (confirm the current figure at FHFA.gov). Above that line, the loan can’t be sold to Fannie Mae or Freddie Mac, so each investor sets its own rules. That is why jumbo loan qualification criteria vary so much from one file to the next.
Duane Buziak works with buyers in Windsor Farms, The Fan, Church Hill, and Midlothian, where a loan can cross that line quickly. The seven strategies below cover credit, debt, reserves, income documentation, appraisals, and program choice. Any minimums mentioned are common ranges, not fixed rules, because they differ by investor. Nothing here is a rate quote or approval promise.
By Duane Buziak, NMLS #1110647
1. Know where conforming ends
The $832,750 limit applies to the loan amount, not the purchase price. That distinction matters because the conforming side of the line has more standardized guidelines, while the jumbo side depends on each investor’s appetite. Sometimes a modest change in down payment moves you from one world to the other.
Here is an illustration. Suppose you are buying a $1,000,000 home in Windsor Farms. With 20% down, the loan is $800,000 and stays conforming. With 10% down, the loan is $900,000, which is $67,250 over the limit, and the whole loan is treated as jumbo.
The common mistake is comparing the home price to $832,750 and assuming you are jumbo, or comparing only the 20% scenario and assuming you are not. A related misconception is that jumbo always demands 20% down. Many programs ask for a meaningful down payment, but the exact figure varies by investor, so test it rather than assume.
- Subtract your intended down payment from the price to get the loan amount.
- Compare that number to the current FHFA limit for your county.
- Rerun it at three or four down payment levels, such as 10%, 15%, 20%, and 25%.
- Note how much extra cash it takes to land under the limit, and decide whether that cash is better kept as reserves.
Measure the loan amount relative to $832,750 in each scenario. VA buyers should also read the VA loan limits page, since eligible veterans with full entitlement generally have no VA loan limit, though the investor still sizes the loan to your income.
2. Build credit to jumbo expectations
Jumbo investors carry the full risk of the loan, so they tend to look harder at credit than conforming programs do. Many want higher scores and low revolving utilization. Utilization, the share of your card limits you are using, is the fastest lever because it recalculates every month.
Take an illustration. A buyer carries $12,000 on cards with $20,000 in limits, which is 60% utilization. Paying that down to $5,000 puts it at 25%, under the 30% mark people often target, and the score can improve within a statement cycle or two.
Start with a soft credit pull mortgage review through NoTouch Credit Pull. Duane Buziak uses it so you can see where you stand without a hard inquiry on your report. The mistake to avoid is opening a new card or financing furniture in the shopping stage, or letting several brokers each run a hard pull. New accounts and inquiries can both move a score at the worst moment.
- Request the soft-pull review and note your scores and balances.
- Pay down the revolving accounts with the highest utilization first.
- Dispute any genuine errors on your reports early, since corrections take time.
- Hold off on new credit until closing.
Track your score and total revolving utilization monthly for 60 to 90 days. If both trend the right way, you are ready to move.
3. Keep debt-to-income inside limits
Debt-to-income ratio (DTI) divides your total monthly debt payments by gross monthly income. Investors set a cap on it, and jumbo caps are often tighter than on some government-backed programs. The CFPB explains DTI in plain terms, and its ability-to-repay rules are why every file must show you can afford the payment.
Here is the math. Say you earn $18,000 a month and carry $7,200 in total debts, including the proposed housing payment. That is 40% DTI. Pay off a $600 monthly car loan and debts fall to $6,600, which is about 36.7%. Removing one installment loan can move you under a cap without changing your income.
The common mistake is leaving out the new mortgage payment, property taxes, homeowners insurance, and any association dues when estimating. A buyer who counts only current debts will think they qualify with room to spare, then learn otherwise at underwriting.
- List every monthly obligation: cards (minimums), auto, student loans, support payments, and the full proposed housing payment.
- Divide the total by gross monthly income.
- Rank installment loans by payment relative to remaining balance, and target the highest ratio first.
- Recalculate after each payoff.
Measure back-end DTI against the cap of the program you are targeting. Treat caps as ranges that vary by investor, and ask which one applies to your file.
4. Stack down payment and reserves
Reserves are liquid funds left after closing, usually expressed in months of the full housing payment. Jumbo investors often want several months to a year of them, because there is no government backstop if income is interrupted. Plan for reserves as a separate target from the down payment.
Here is an illustration. If your total monthly payment is $7,900, six months of reserves is $47,400 and twelve months is $94,800. That is cash you must still hold after the down payment and closing funds are spent. Buyers who plan only for the down payment are often surprised here.
The most common pitfall is moving large, undocumented deposits into an account just before applying. Underwriters ask for the source of any unusual deposit, and funds that have not “seasoned” (sat in the account, typically for about two months) can be excluded or require a paper trail. Which accounts count, and at what percentage for assets like retirement funds or stocks, depends on the investor.
- Gather two months of statements for every account you plan to use.
- Flag any deposit that is not a regular paycheck and write down its source.
- Ask which accounts count toward reserves and at what value.
- Leave seasoned funds where they are until closing.
Measure months of reserves available after closing, using the investor’s counting rules rather than your total net worth.
5. Document variable income with bank statements
Tax returns can understate what a self-employed borrower really earns, since deductions shrink the net. A bank statement loan is a type of Non-QM (non-qualified mortgage) program that estimates income from deposits instead. Non-QM simply means the loan follows guidelines outside the standard agency box, and some jumbo-sized files fit it well.
Imagine a Richmond contractor with $30,000 in average monthly business deposits and a 50% expense factor. Qualifying income would be $15,000 a month, which may be well above what the tax returns show. Expense factors vary by program and by business type, so that 50% is only an example.
The common mistake is commingling personal and business deposits without explanation. Transfers between accounts, loan proceeds, and refunds can all be treated as non-income, which lowers your average.
- Collect 12 to 24 months of business statements, depending on the program.
- Label transfers, one-time deposits, and anything that is not revenue.
- Separate business and personal accounts going forward.
- Have a CPA letter ready in case the investor asks to verify the business or the expense factor.
Measure qualifying monthly income under the statement method against tax-return income. If the gap is large, the program may be the difference between approval and a decline.
6. Prepare for appraisal pressure
Higher-priced pockets have fewer true comparable sales, and jumbo investors may require a more thorough appraisal, sometimes a second one. Unique or historic homes are harder to compare, so appraisals can come in under contract price. Check recent neighborhood values on Zillow or with your agent, and treat any median as a snapshot “as of” its date.
Consider an illustration. A historic Fan rowhouse is under contract at $950,000 and appraises at $910,000. The $40,000 gap does not get financed, so the buyer must bring that cash, renegotiate the price, or walk if the contract allows.
The pitfall is waiving the appraisal contingency to make an offer stronger without enough cash to cover a gap. The same risk applies in Church Hill, where renovated and unrenovated blocks sit close together, and in Midlothian, where newer construction can have thin comps.
- Ask your agent for recent closed sales with similar size, age, and condition.
- Order the appraisal early where the contract allows.
- Decide before offering how much of a gap you can cover and from which funds.
- Remember that gap cash comes out of the reserves you planned in strategy 4.
Measure appraised value against contract price, and compare it to your comps before the report arrives.
7. Compare programs across many investors
Because there is no single jumbo standard, a broker who can reach hundreds of investors can find the guidelines that fit your file. An overlay is an extra rule an investor adds on top of the baseline, such as a higher reserve requirement. Two investors can approve the same borrower at different cash requirements.
Here is an illustration of the same file under two programs:
- Program A: slightly lower rate, 12 months of reserves, 24 months of statements.
- Program B: slightly higher rate, 6 months of reserves, 12 months of statements.
On a $7,900 payment, the reserve difference alone is $47,400. That can change the cash you need at closing by tens of thousands, which matters more than a small rate difference.
The common mistake is choosing on rate alone without checking reserve and documentation requirements. Ask for a mortgage pre approval without hard pull first, compare the overlays side by side, then lock with the best fit.
Measure total cash to close and monthly payment across programs. Whichever program wins on both numbers for your timeline is usually the right one.
Where to start this week, and how to move forward
Start with two things this week: the soft-pull review and the conforming-versus-jumbo check. Together they take little time and tell you which of the other strategies matter most. Next, work on reserves and DTI, since those take the longest to change. Finish with the program comparison once your numbers are settled, so you shop with a clean file. Because NoTouch Credit Pull makes this a no credit hit mortgage application at the start, you lose nothing by finding out where you stand.
Ready to secure your dream home with Richmond’s most trusted mortgage expert? Get your personalized rate comparison today with no credit impact and discover why hundreds of local families choose Duane Buziak for stress-free mortgage solutions backed by 24/7 support and the fastest close times in the area. Call Richmond Mortgages by Duane Buziak at 804-212-8663.
