7 Ways to Get a Mortgage With High Debt-to-Income in Richmond

Duane Buziak

Duane Buziak
Mortgage Maestro | NMLS #1110647 | Coast2Coast Mortgage LLC
Licensed mortgage broker serving Virginia, Florida, Tennessee, Georgia, and Washington, specializing in VA home loans and first-time homebuyer programs.

A high debt-to-income ratio does not automatically end a Richmond home purchase, but the program you choose and how you prepare the file matter more than most buyers expect. In Henrico and Chesterfield, many buyers carry car loans and student debt while prices keep climbing, and they assume a number on a screen has already decided the outcome. It usually has not. Duane Buziak walks through seven high debt to income mortgage options below, in the order most buyers should try them, with notes on when each one fits.

Two terms first. Front-end DTI is your proposed housing payment (principal, interest, taxes, insurance, mortgage insurance, association dues) divided by gross monthly income. Back-end DTI adds every other monthly debt on your credit report. The CFPB explains DTI as a measure of how much of your income is already committed, and treats it as one factor among several, not a single pass-or-fail line.

1. Run a Soft Credit Pull to See Your Real DTI

You cannot fix a ratio you have not measured. A soft credit pull mortgage review shows your middle score, every tradeline, and your front-end and back-end DTI without a hard inquiry, so nothing is recorded against your score. Duane Buziak uses NoTouch Credit Pull for this first step, then matches the numbers to programs. If you want to see how this works in practice, read about soft pull mortgage prequalification in Richmond.

For illustration, imagine a Midlothian buyer who assumes her debts are fine. The soft pull shows a $410 car payment plus card minimums pushing her back-end DTI past the target for the program she wanted. Because she learned this before applying, she has time to pay down one card and pick a better-fitting program, with no scarred report.

  1. Gather two recent pay stubs, last year’s W-2s, and a written list of every monthly debt.
  2. Complete the soft pull with Duane Buziak.
  3. Review front-end DTI, back-end DTI, middle score, and which programs the file matches today.

The common mistake is letting several brokers or banks each run a hard pull just to learn whether you qualify. Multiple mortgage inquiries in a short window are often grouped for scoring, but you should not need any to get an answer. Measure two things: your back-end DTI and middle score, and your count of hard inquiries, which should be zero at this stage.

2. Use VA Loan Flexibility

VA underwriting weighs residual income, the money left each month after taxes, housing, debts, and maintenance, against a table set by region and family size. That is why a veteran with a high ratio can still be approved. The VA Lenders Handbook (Chapter 4) treats its DTI figure as a benchmark, not a cap, and describes strong residual income as a compensating factor.

Illustration: a Chesterfield veteran with a family of four has a back-end DTI above what a conventional file would tolerate, but her residual income clears the VA table comfortably. The conventional file stalls; the VA file moves forward.

  1. Request your Certificate of Eligibility.
  2. Calculate residual income for your region and household size using the current table.
  3. Ask Duane Buziak to confirm investor overlays before you commit to a loan source.

The pitfall is assuming “no DTI limit” means no limit. VA does not set a hard cap, but individual investors apply their own overlays, and those vary. Another reason to confirm early: VA lets eligible borrowers with lower credit scores in the door, and Duane Buziak can work with VA files down to a 500 FICO depending on the investor. Measure residual income against the VA table for your region and household size, and look for a cushion, not a bare pass.

3. Lean on FHA Compensating Factors

FHA guidance in HUD Handbook 4000.1 starts from benchmark ratios but allows higher ones when the file shows offsetting strengths: cash reserves, stable employment, minimal payment shock, and other documented factors. Automated underwriting weighs these together, so a file that looks tight on paper can still receive an approval. For a deeper look at how ratios drive approval, see this guide to debt to income ratio for mortgage approval.

Illustration: a renter in The Fan pays $1,650 a month and has done so on time for two years. The proposed payment is $1,800, and she has six months of reserves. Her history proves she can carry nearly the same housing cost, which is the strongest argument a high-ratio file can make.

  1. Document reserves with two months of statements and gather twelve to twenty-four months of rent history.
  2. Request an automated underwriting review and read the findings, not just the result.
  3. Compare total monthly payment including mortgage insurance across down payment options.

Many buyers ignore that FHA mortgage insurance raises the payment and the housing ratio, which can erase the benefit of a lower rate. Measure payment shock (new payment minus current rent) and whether the automated review returns an approval.

4. Restructure the Debts That Move DTI Most

DTI counts monthly payments, not balances, so the debt worth attacking is the one with the highest payment relative to what you owe. This corrects a common belief that the biggest balance matters most. Student loans in particular can distort the ratio, which is covered in how student loans affect mortgage approval.

Here is a labelled illustration. Suppose gross income is $6,500 a month, the proposed housing payment is $2,100, and other debts are a $310 auto payment, a $120 card minimum, and a $250 student loan. Total: $2,780, or 42.8% back-end DTI. Paying off a $6,000 auto loan removes $310 and brings the ratio to $2,470 divided by $6,500, or 38.0%. Putting the same $6,000 toward a card that only removes a $120 minimum when cleared lands at 40.9%. Same cash, a difference of almost three points.

  1. List each debt with its monthly payment and balance, then divide payment by balance.
  2. Pay off the highest ratio first.
  3. Ask Duane Buziak how the program treats installment loans with few payments left, since some rules exclude them.

Two mistakes sink this plan: closing old accounts, which can lower your score and shorten history, and opening new debt mid-process. If your score needs work first, follow these steps for improving your credit score before a mortgage application. Track back-end DTI before and after, in percentage points.

5. Add Qualifying Income Properly

A ratio has two sides. If you cannot shrink the debts, enlarge the income that counts. Overtime, bonuses, and second jobs can qualify once the program’s history requirement is met, and self-employed buyers whose tax returns are reduced by write-offs may qualify on bank statements instead. Business owners can start with this walkthrough of a bank statement mortgage for business owners.

Illustration: a self-employed Henrico contractor shows modest taxable income after deductions, but twelve to twenty-four months of business deposits support a much higher qualifying figure. Under bank statement documentation, the same debts produce a lower ratio.

  1. Collect the history your program requires, typically two years for variable income.
  2. Run the file both ways, full documentation and bank statement, and compare.
  3. Test a co-borrower’s effect on paper before adding anyone.

The pitfall is adding a co-borrower whose own debts cancel the extra income, leaving the ratio worse. Measure qualifying monthly income and the resulting DTI under each documentation type, and choose the version with the better result, not just the simpler paperwork.

6. Use DSCR or Non-QM for Investment and Complex Files

A debt service coverage ratio loan looks at the property, not you. It compares rent to the monthly payment, so personal DTI is not the deciding number. Non-QM programs similarly fit buyers whose income does not look conventional. Duane Buziak places DSCR, Non-QM, and bank statement files, options many online retail shops do not offer. Investors can compare approaches in this guide to mortgage options for investment rental properties.

Illustration: an investor eyeing a duplex near VCU shows market rent comfortably above the full payment. The loan qualifies on that coverage, and the investor’s car loans and other personal debts do not drive the decision.

  1. Get a market rent estimate for the property.
  2. Compare DSCR minimums, down payment, and prepayment terms across programs.
  3. Check current rate conditions as of your application date, since pricing moves.

The common mistake is focusing on rate alone and missing prepayment penalties and larger down payments, which can cost more than a slightly higher rate. Measure the DSCR itself, and total cost of the loan over your expected hold period against the conventional alternative.

7. Shop Hundreds of Investors Through One Broker

Investors set their own overlays, so the same documents can earn a decline in one place and an approval in another. Duane Buziak can submit one file across hundreds of loan sources, which is how a tight ratio finds the investor whose rules fit it. With a mortgage pre approval without hard pull, the file can be reviewed in this way before any inquiry hits your credit. To understand the advantage, see how to get the best deal using a Richmond VA mortgage broker.

Illustration: a file declined by one investor for an overlay on debt-to-income is approved by another using identical documents. Nothing about the buyer changed, only who read the file.

  1. Complete the soft-pull file with Duane Buziak.
  2. Have it submitted across investors that fit your program.
  3. Compare offers side by side: rate, fees, assistance programs, and the cash needed at closing. Ask about no-out-of-pocket closing options where they apply.

Two mistakes to avoid: treating one “no” as the final word, and comparing only rates while ignoring fees. Measure the number of approvals you receive and the lowest total cost across offers.

Start With Your Number, Then Pick the Route

Begin with the soft pull so you know your ratio and score. Then choose by file: VA if you are eligible, FHA if reserves and rent history are strong, debt restructuring if one payment is distorting the ratio, and Non-QM or DSCR if income or property type does not fit conventional rules. For context, the 2026 conforming loan limit is $832,750 according to the FHFA, and a Midlothian or Henrico purchase usually falls well within it. Before choosing, check recent prices on Virginia REALTORS market data.

  • VA: best for eligible borrowers with strong residual income; watch investor overlays.
  • FHA: best with reserves and rent history; watch mortgage insurance.
  • Debt restructuring: best when one payment dominates; avoid new debt.
  • Added income: best for variable or self-employed income; test co-borrowers first.
  • DSCR or Non-QM: best for investors and complex files; watch prepayment terms.

Ready to secure your dream home with Richmond’s most trusted mortgage expert? Get your personalized rate comparison today with no credit impact and discover why hundreds of local families choose Duane Buziak for stress-free mortgage solutions backed by 24/7 support and the fastest close times in the area. Call 804-212-8663 (NMLS #1110647) or reach Richmond Mortgages by Duane Buziak online.