Construction Loan to Permanent Mortgage: Building in Midlothian

Duane Buziak

Duane Buziak
Mortgage Maestro | NMLS #1110647 | Coast2Coast Mortgage LLC
Licensed mortgage broker serving Virginia, Florida, Tennessee, Georgia, and Washington, specializing in VA home loans and first-time homebuyer programs.

A construction loan to permanent mortgage is a short-term building loan that becomes a standard home loan once the house is finished. How that conversion happens depends on the structure you pick before breaking ground. In a one-time close, it happens inside a single loan. In a two-time close, you have to qualify and close a second time. This article follows one hypothetical Midlothian build from lot to final loan, with the draw process, a worked cost example, and the questions to ask before you sign a builder contract.

Why Midlothian Lots Make This Loan Worth Understanding

Western Chesterfield County has plenty of buyers who skip the resale market entirely. They buy or already own a lot in and around Midlothian, hire a builder, and finance the whole project. That route can get you the layout, the school zone, and the yard you want, but it runs on a different loan than a regular purchase, and the paperwork has more moving parts.

Three terms carry most of the weight:

  • Construction period: the months while the house is being built, usually under a year. The loan funds the work in stages rather than all at once.
  • Interest-only payments on drawn funds: you pay interest only on the money the builder has actually been paid so far, not on the full approved amount.
  • Conversion: at completion, the loan turns into a regular principal-and-interest mortgage, typically a 15- or 30-year term.

That second point corrects a common misconception. You do not pay interest on the full loan amount from day one. Early payments are small and grow as the builder draws more funds.

Local pricing matters because it sets what the finished house must appraise for. Check the current Chesterfield County median sale price on the Virginia REALTORS market data pages before you set a budget. Median figures move month to month, so use the most recent release and note its date. I do not quote a number here because it would be stale before you finished reading. Midlothian new construction often prices above the countywide median, which is why the appraisal step covered below deserves attention.

One-Time Close vs. Two-Time Close: The Choice That Shapes Everything

Every construction financing path falls into one of two structures, and the choice affects your costs, your rate risk, and how much can go wrong mid-build.

One-time close (construction-to-perm)

You apply once, qualify once, and close once. The same loan carries you through construction and then converts to the permanent mortgage with no second closing. Rate handling varies by program. Some structures lock the permanent rate at the start, and some offer a float-down option if rates drop. Options differ by source, so I confirm what a specific program allows before anyone relies on it.

Two-time close

You take a separate construction loan first. When the house is done, you apply for a brand-new permanent mortgage with its own application, underwriting, appraisal, and closing costs. The upside is flexibility: you can shop the market at completion, and if rates have fallen, you benefit. The downside is that you carry rate risk for the entire build.

The misconception worth correcting is that the permanent loan is automatic. In a two-time close, it is not. If you change jobs, take on a car payment, or watch your credit score slip during the build, the second underwriting can come out differently than the first. A finished house with no approved permanent loan is a stressful place to be.

Choosing by situation

  • Fixed timeline and firm budget: a one-time close usually fits better, since you lock in your structure and avoid a second approval.
  • Uncertain budget or a builder who may run long: a one-time close protects you from re-qualifying, though you should ask how extensions and rate locks interact.
  • Stable income, strong reserves, and a belief that rates will fall: a two-time close can make sense, provided you accept the rate gamble.
  • Income likely to change soon: avoid a structure that requires you to qualify again after the house is built.
  • Cost sensitivity: a one-time close generally means one set of closing costs instead of two, which the worked example below illustrates.

How the Draw Schedule Works From Foundation to Final Inspection

A draw schedule is the plan for releasing loan money to the builder in stages. Here is the usual sequence on a Midlothian build:

  1. Land closing or equity. If you are buying the lot, that closes first. If you already own it, its value usually counts toward your down payment.
  2. Contract and plans approval. Your broker reviews the builder contract, plans, specifications, and line-item budget.
  3. As-completed appraisal. The appraiser estimates what the finished house will be worth based on the plans. That value, along with cost, sets how much you can borrow.
  4. Staged draws. Money is released after milestones such as foundation, framing, rough-in, and drywall, each typically verified by an inspection.
  5. Final inspection and certificate of occupancy. A certificate of occupancy is the local sign-off that the home is safe to live in. Conversion generally cannot happen without it.

On payments, imagine you are approved for $410,000 and, at an assumed 8% construction rate, the builder has been paid $60,000 by month two. Your interest-only payment is about $400. By month five, with $200,000 drawn, it is about $1,333. By the last draw, at the full $410,000, it is about $2,733. The payment climbs because the balance climbs.

Providers and brokers typically want a licensed, insured builder, a detailed budget that includes a contingency cushion, and the final certificate of occupancy before conversion. For permit and occupancy steps in the county, rely on Chesterfield County’s official website, since inspection and permitting procedures are set locally and can change.

Delays usually come from three places: weather, material substitutions, and change orders. Change orders are the sneakiest. Upgrading countertops or adding a covered porch changes the budget, and the added cost often has to be paid from your own funds or approved by your loan provider before work proceeds. I tell buyers to finalize selections early and keep contingency money untouched until they truly need it.

Qualifying: Credit, Down Payment, and Where Soft-Pull Pre-Approval Fits

Construction financing looks at the same core factors as any mortgage: credit score, debt-to-income ratio, down payment or lot equity, and cash reserves. Requirements vary by program and change over time, so any specific minimum you read online, including from me, should carry an “as of” date and a confirmation step. Some programs ask for more reserves on a construction file than on a standard purchase because the timeline carries more uncertainty.

Another misconception is that construction loans are only for people with perfect credit. Credit expectations depend on the program, and some options are more flexible than buyers assume. VA and FHA both have construction-related paths, though the specifics are narrower than for a standard purchase. Review current VA guidance on the VA home loans page and FHA information through HUD’s single family housing resources before you assume either fits your build. For VA files, I work with wholesale sources whose credit floors can reach 500 FICO depending on the borrower’s overall file, but eligibility always depends on the full picture.

If you are self-employed, or you are a builder financing your own home, income documentation can complicate a standard file. Non-QM options such as bank statement programs exist for some borrowers, but availability for construction specifically is narrower, so I verify it case by case and never promise it upfront.

Before you sign with a builder, I can start with a soft credit pull mortgage review through NoTouch Credit Pull. That shows you which structures and programs you are likely to fit without a hard inquiry on your report, so you can choose a builder knowing the financing side is realistic.

Worked Example: A $520,000 Midlothian Build, Start to Finish

This is an illustration with assumed numbers, not a quote or a rate offer. Suppose a buyer already owns a Midlothian lot and plans a new home.

  • Lot value (owned outright): $110,000
  • Construction cost per the builder contract: $410,000
  • Total project cost: $520,000
  • Assumed as-completed appraised value: $560,000
  • Equity in the project from the lot: $110,000, or about 21% of cost
  • Loan amount: $410,000

That loan sits well under the 2026 conforming limit of $832,750, which you should confirm on FHFA.gov.

During construction. Assume an 8% interest-only rate and draws spread over about nine months. If the average outstanding balance is roughly $205,000, interest runs about $1,367 a month, or around $12,300 across the build. Payments start near zero and finish near $2,733.

After conversion. Assume a 6.5% fixed rate on a 30-year term. Principal and interest on $410,000 comes to roughly $2,590 a month. These rates are placeholders for illustration, not a statement of current pricing as of October 2026.

Closing costs, one-time vs. two-time. Assume a single closing costs about 2% of the loan, or $8,200. With a two-time close, assume a first closing at $8,200 and a second closing for the permanent loan at about 1.5%, or $6,150, for a combined $14,350. In this scenario, the second closing adds roughly $6,150, which is the price of keeping the option to shop for a rate at completion. The real gap depends on the providers, the title work, and the appraisal fees involved.

Comparing Your Options: Construction-to-Perm Paths Side by Side

Where you get the loan affects how many structures you can choose from. Here is how a single-source retail provider generally compares with a broker who has many wholesale sources. Entries marked “verify” depend on the specific provider and should be confirmed in writing.

  • Loan structure. A single-source provider typically offers the products it has in house, often one-time close, sometimes two-time. Duane Buziak can match you to either structure across many wholesale sources.
  • Rate-lock approach. Single-source: verify whether the rate locks at application or at closing, and whether a float-down exists. Duane Buziak: lock options vary by program, and I lay out each one before you commit.
  • Program range. Single-source: verify which government and specialty programs apply to construction. Duane Buziak: conventional, VA, and FHA paths, with Non-QM, DSCR, and Bank Statement products where they fit and are verified for construction.
  • Credit flexibility. Single-source: verify the minimum score. Duane Buziak: VA options with some sources can reach 500 FICO, depending on the full file.
  • Closing-cost picture. Single-source: ask for a written estimate. Duane Buziak: ask about our no-out-of-pocket closing options, which depend on the structure and the transaction.

Whichever route you take, ask every provider these questions before you sign a construction contract:

  1. Is this a one-time or two-time close, and what happens to my rate if the build runs late?
  2. Can I lock the rate now, and does the lock expire?
  3. What are my total closing costs across every closing, in writing?
  4. Which builder requirements apply, and does my builder meet them?
  5. How are change orders handled, and who pays for them?
  6. What must be true on my credit and income at conversion?

Construction Loan to Permanent Mortgage FAQ

How does a construction loan convert to a permanent mortgage?

In a one-time close, the loan converts automatically after the certificate of occupancy and final inspection, without a new application. In a two-time close, you apply for and close a separate permanent mortgage when the build ends. Conversion is not automatic in every structure.

Can I lock my rate before building?

Often yes with a one-time close, though terms vary by program. Some structures lock the permanent rate upfront, and some offer a float-down option. Lock length and extension fees differ, so confirm the details in writing before you commit.

What is the difference between one-time and two-time close?

A one-time close uses one application and one closing for both construction and the permanent loan. A two-time close uses a separate construction loan, then a new application, underwriting, and closing for the permanent mortgage. The second adds flexibility and rate risk.

Do I pay interest on the full amount during construction?

No. You pay interest only on the funds already drawn. Payments begin small and rise as the builder is paid in stages. Your payment peaks when the final draw is released and the loan balance reaches its full amount.

What credit score is needed?

It depends on the program, and requirements change, so any figure should carry an “as of” date. Construction loans are not reserved for perfect credit. Duane Buziak reviews your file and matches it to programs whose minimums you realistically meet.

Can I use a VA loan to build?

Possibly. VA construction financing exists but is narrower than standard VA purchase financing, and it depends on the provider and your eligibility. Review current rules on VA.gov, then have your file checked against the sources available for a Midlothian build.

What happens if the build runs over budget?

Overruns usually come from change orders, material changes, or delays. You may need to pay the difference from your own funds or get approval to adjust the loan. A contingency line in the original budget is the best protection.

Can I get pre-approved without a hard inquiry?

Yes. Duane Buziak can run a mortgage pre approval without hard pull through NoTouch Credit Pull, which shows your likely options with no impact on your credit report. A hard inquiry comes later, when you choose a structure and formally apply.

Settle the Loan Structure Before the Excavator Arrives

The loan structure is much harder to change once the lot is cleared and the builder has started. Choosing it first protects your budget from a second round of closing costs and your rate from a market you do not control. A one-time close buys certainty, and a two-time close buys flexibility. Know which one you are paying for.

Ready to secure your dream home with Richmond’s most trusted mortgage expert? Get your personalized rate comparison today with no credit impact and discover why hundreds of local families choose Duane Buziak for stress-free mortgage solutions backed by 24/7 support and the fastest close times in the area. Call Richmond Mortgages by Duane Buziak at 804-212-8663 to start a no credit hit mortgage application for your Midlothian build.